العربية

طلاء مطاطي لحماية أسفل السيارة

الشركة: WÜRTH®
كود المخزن: WU-0892 075200
KD 6.250
يقاوم الحصى والخدوش وأعادة حماية المناطق المتضررة
التوفر: فى المخزن
+ -
Specification

Rubber-based coating compound containing solvents, can be painted over
Excellent adhesion, quick skin formation
Scratch-resistant
Can be painted over with many commercially available, solvent-based and water-based one-component and two-component top coat paints
Suitable for oven drying briefly at 40°C to 60°C
Highly sandable once fully dry
 

Tip for pros

Various structures can be sprayed by changing the distance or pressure
The colour will become darker by staining it with clear varnish
Notice
Do not spray on joints, engines, gears and brake systems. After use, turn the can upside down and spray until the valve is empty. Do not dilute, or mix with water or paint. The product can be painted within 24 hours. It can then only be painted once it has been sanded and cleaned.

Application

Application area
For repairing and restoring the original structure and for protecting against stone chips and corrosion in all visible areas, e.g. front and rear aprons, side members, bumpers and chassis on cars, trucks and buses. Ideally suited for use as anti-humming compound for wheel wells and chassis.

Instructions
Shake well before use. The surface must be clean, dry and free from rust and dust. Spray a very thin coat for the first coat for improved adhesion and let it flash off for approx. 3 minutes. Then apply the next coat. Allow each intermediate coat to flash off. Operating pressure: 2–4 bar Optimum spraying distance: 30 cm. The best spraying results are achieved at a processing temperature of 15–25°C.

Technical information

Chemical basis

Natural rubber

Contents

1000 ml

Weight of content

1080 g

Colour

Black

Max. processing temperature

25 °C

Max. pressure

4 bar

Max. temperature conditions

60 °C

Min./max. temperature conditions

10 to 60 °C

Min. pressure

2 bar

Min./max. spraying distance

20-30 cm

Can be varnished after

1 h

Drying time/conditions

1.5 h / at 20°C and 65% relative humidity

Conditions for drying time

at 20°C and 65% relative humidity

Density/conditions

1.08 kg/l / at 20°C

Min./max. temperature resistance

-40 to 90 °C

Max. temperature resistance

90 °C

Density conditions

at 20°C

Shelf life from production/conditions

24 Month / at 10°C to 30°C

Conditions to maintain shelf life from production

at 10°C to 30°C
كتابة التقييم الخاص بك إغلاق نموذج المراجعة
  • يمكن للمستخدمين المسجلين فقط التقييم
*
*
سىء
ممتاز
*
*
*