مشحم متعدد الأستخدامات

الشركة: WÜRTH®

كود المخزن: WU-0893 8701

KD 2.750

Universal lithium-saponified grease, stable under heavy loads and resistant to oxidation. Forms an excellent seal to repel dust and dirt.

التوفر: فى المخزن

الكمية:

+ -

نبذة عامة
التقييمات
تواصل معنا

Specification

Universal lithium-saponified grease
Stable under heavy loads and resistant to oxidation
Forms an excellent seal to repel dust and dirt
Good adhesive properties
Silicone-free, acid-free, resin-free and AOX-free

Application

Application area
Multi-purpose grease I is particularly suitable for lubricating sliding and rolling bearings subject to normal loads. Furthermore, it can be used at high and low speeds and temperatures. It ensures excellent resistance/sealing even in wet or dusty environments and can also be delivered in long lubrication pipes.

As a universal grease, it can also be used for vehicle and machine elements subjected to light loads, such as shafts, spindles, electric motor bearings, ball bearings, roller bearings, chassis, etc.

Technical information

Weight of content 400 g

Container Cartridge

Soap base Lithium 12 hydroxystearate

Lubricant code K2K-30

Min./max. temperature conditions -30 to 130 °C

Colour Yellow

NLGI grade/conditions 2 / with DIN 51818

Base oil viscosity, kinematic/conditions 110 mm²/s / at 40°C

Min. dripping point/conditions 180 °C / in accordance with DIN ISO 2176

Min./max. worked penetration /conditions 265 x 0.1 mm-295 x 0.1 mm / in accordance with DIN ISO 2137

Corrosion protection period/category Corrosion category 0

VKA welding load 1800 N

Shelf life from production 60 Month

Oil basis Mineral oil

Lubricant system Grease

Smell/fragrance Characteristic

Density 1 g/cm³

Density conditions at 20°C

Conditions for viscosity of oil basis at 40°C

Dripping point conditions in accordance with DIN ISO 2176

Min. temperature conditions -30 °C

Max. temperature conditions 130 °C

Max. short-term temperature resistance 130 °C

Worked penetration conditions in accordance with DIN ISO 2137

Conditions for NLGI grade with DIN 51818

Corrosion protection period conditions in accordance with DIN 51802, SKF Emcor test

Conditions for VKA welding load in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)

Resin-free Yes

Silicone-free Yes

Acid-free Yes

AOX-free Yes

Free from heavy metals Yes

Chloric No

كتابة التقييم الخاص بك إغلاق نموذج المراجعة

يمكن للمستخدمين المسجلين فقط التقييم

عنوان التقييم: *

نص التقييم: *

اسمك *

بريدك الإلكتروني *

الاستفسار *