Specification
High pressure resistance
Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening
Good creep properties
Adhesive
Lubricant is centrifuge-resistant on turning and rotating parts
Good material compatibility
O and X-ring compatible, as well with plastics. Neutral behaviour on painted substrates.
Resistant to splashed water, salt water, weak acids and alkalis
Silicone-free, resin-free and acid-free
Resistance to high pressure loads
The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.
Application
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels
Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.
Technical information
Chemical basis
Hydrocarbon
Oil basis
Synthetic mineral oil
Colour
Yellowish
Smell/fragrance
Oil
Density
0.742 g/cm³
Density conditions
at 20°C
Min. temperature conditions
-25 °C
Max. temperature conditions
180 °C
Max. short-term temperature resistance
200 °C
Min. flashing point of active ingredient
300 °C
Kinematic oil basis viscosity
1500 cSt
Silicone-free
Yes
Acid-free
Resin-free
AOX-free
Resistance against
Salt waterWeak lyesWeak acidsSplash
Contents
500 ml
Container
Can
Shelf life from production
24 Month
