العربية

FAST GRINDING POLISH P10 PLUS WURTH

الشركة: WÜRTH®
كود المخزن: WU-0893 150010
KD 18.000
Highly abrasive high-gloss polish for quickly removing surface defects in fresh repairs and fully hardened topcoats
التوفر: فى المخزن
+ -

Specification

Highly abrasive high-gloss polish for quickly removing surface defects in fresh repairs and fully hardened top coats

Innovative powdered composition made from aluminium oxide

  • Extremely high surface removal rate and unprecedented gloss level
  • Effortlessly removes sanding grooves from a grain of P1500 upwards

Thick consistency

  • Polish does not splash
  • Economical
  • Low dust formation
  • No laborious re-cleaning of adjacent areas

Can be applied manually and by machine

 

For conventional and scratchproof paint types

 

Suitable for use on used and new paint surfaces

 

Silicone-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Highly abrasive high-gloss polish for quickly removing surface defects in fresh repairs and fully hardened top coats as well as for polishing stubborn signs of usage on used paints.

Painter preparation:

Dust inclusions, sanding grooves, orange peel, paint defects

Instructions

Shake well before use. Moisten the surfaces of the selected polishing disc evenly with the paste and apply a small amount to the surface to be polished. Position the polishing pad flat on the area and start the machine. Apply a certain pressure at 1500–2000 rpm, process the surface until grinding traces or paint imperfections have been removed. Work in sections! Remove residual polish with a microfibre cloth. Remove any remaining streaks with P30 Plus anti-hologram polish.

Technical information

Weight of content

1 kg

Chemical basis

Isoalkane

Smell/fragrance

Characteristic

Colour

Green

Density

1.25 g/cm³

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 5°C to 35°C

Silicone-free

Yes

كتابة التقييم الخاص بك إغلاق نموذج المراجعة
  • يمكن للمستخدمين المسجلين فقط التقييم
*
*
سىء
ممتاز
*
*
*