MS HYBRID POLYMER INSTANT ADHESIVE WURTH - 290 ML

الشركة: WÜRTH®

كود المخزن: WU-0893 226101

كل أول من يقيم هذا المنتج

KD 3.500

Structural adhesive with extreme initial SMP based bonding

الكمية:

+ -

نبذة عامة
التقييمات
تواصل معنا

Extremely high initial bonding (High Tack)

• Does not slip when applied vertically
• No additional fixing necessary

Permanently elastic adhesive joint

• Smooths out unevenness and material stresses
• Absorbs acoustic and mechanical vibrations

Universal application indoors, outdoors and underwater

• Perfect adhesion, largely without primer, to most including moist surfaces
• Good UV stability and weathering resistance outdoors
• Can be painted over after fully drying
• Not corrosive to metals

High final tensile strength
Waterproof and saltwater-proof
Solvent- and silicone-free

Application

Suitable for bonding in the construction and metals industries, assembly bonds, vehicle and caravan construction, vehicle superstructures, machine and container construction, glass bonding in furniture and display case construction, solar and wind power plants, various industrial areas, apparatus and plant construction etc. E.g. bonding of door frames, windowsills, corner profiles, sheets, panels, floor panels, cable ducts, stair construction, laminate laying, trim strips, signpost attachment, wood constructions, insulation materials.

Note

Not suitable for expansion joints and natural stone.

Instructions

The application surfaces must be solid, clean, dry and free from grease and oil. Apply the adhesive using a suitable application gun. Apply adhesive in vertical beads at a distance of 10 cm to 20 cm. Place the work pieces in the correct position within the skin formation time and press these together to ensure that the thickness of the adhesive between the material and surface is at least 2 - 3 mm. Do not apply the adhesive in dots! Due to the high initial strength, fixing is not normally required during hardening. Reseal the opened cartridge so that it is airtight. Remove any adhesive that has escaped while it is still fresh. Cleaning hardened adhesive can only be done mechanically.

كتابة التقييم الخاص بك إغلاق نموذج المراجعة

يمكن للمستخدمين المسجلين فقط التقييم

عنوان التقييم: *

نص التقييم: *

اسمك *

بريدك الإلكتروني *

الاستفسار *