NEUTRAL SILICONE-TRANSPARENT WURTH - 300 ML

الشركة: WÜRTH®

كود المخزن: WU-1892 5301

KD 2.000

Weatherproof sealing of glass curtain wall, stone curtain wall(marble, granite), aluminium curtain wall and metal curtain wall.

التوفر: فى المخزن

الكمية:

+ -

نبذة عامة
التقييمات
تواصل معنا

• Excellent adhesion to building-relevant surfaces
• Causes no corrosion on metals
• Resistant to ageing, weathering and UV radiation
• Permanently elastic

Features

• Single-component, deoxime neutral curing, medium/high modulus.
• High tensile strength, high adhesive ability.
• Excellent unprimed adhesion to most common building substrates.
• Excellent weatherproof, age resistance.
• UV and Ozone stable.

• Sag resistance: < 3 mm
• Volume loss: < 20%
• Adhesion expansion behavior when pretensioned after immersion in water: Passed
• Adhesion expansion behavior at different temperatures: Passed
• Adhesion expansion behavior after heat, water and artificial UV light: Passed
• Tensile behavior: Elongation at rupture at 23°C: > 25%
• Formulated to resist growth of mold.

Main Function

• Weatherproof sealing of glass curtain wall, stone curtain wall(marble, granite), aluminium curtain wall and metal curtain wall.
• Perimeter joints and other architectural and industrial sealing.

Area of use
• Sealing of expansion joints indoors
• Without primer: Most types of metals, wood, glass, enamel, tiles, hard PVC
• With primer: Concrete, chalky sandstone, clinker, brick, gypsum, plaster.

Note
Due to the large number of existing paint and glazing formulas, especially on alkyd resin paints and powder-coated aluminum, it is necessary to conduct a check with your own tests. Danger of yellowing on contact with white alkyd resin paints cannot be excluded.
Neutral silicone gives off an odor typical of silicone when curing. This is no longer perceivable after complete curing.

Technical data
Chemical base: Oxime interlacing silicon polymer
Max. permanent motion apsorption: 25% of the joint width
Full hardening speed: 2 mm after 24h/50% rel. air humidity
Temperature resistance: -40°C to +150°C
Processing temperature: +5°C to +40°C
Paintability: No
Paint tolerance: Yes, pretrial required
Fungicidal equipment: No
Shore-A hardness: 15
Density (23°C): 0,98g / cm³(transp)/1,24g/cm³ (color)
Elongation at break: >300%
Volume shrinkage: <10%

كتابة التقييم الخاص بك إغلاق نموذج المراجعة

يمكن للمستخدمين المسجلين فقط التقييم

عنوان التقييم: *

نص التقييم: *

اسمك *

بريدك الإلكتروني *

الاستفسار *